Product Features:
1. To fully take advantage of the extremely extended life of LEDs, use flip-chip COB LED light sources.
2. To achieve the optimal heat dissipation effect, the radiator and lamp housing are integrated, and the LED light source is directly connected with the housing.
3. Die-casting of aluminium alloy to attain IP65 protection level effectiveness
4. Traditional street lights' drawbacks—glare, strobe, and beginning delay—are eliminated.
5. Select a green switching power supply that is wide voltage (AC100-277V), high efficiency, constant current, and constant voltage (DC/DC switching power supply is also a choice).
Product Specific：
| Product Dimensions | 24.8 x 9.8 x 2.4 inches |
| Style | Modern |
| Shape | Rectangular |
| Number of Lights | 144 |
| Voltage | 3.7 Volts |
| Power Source | Solar Powered |
| Type of Bulb | LED |
| Luminous Flux | 12000 Lumen |
| Wattage | 150 watts |
| Color Temperature | 6500 Kelvin |
Detailed Images:
Water is not a problem for our IP65 photovoltaic led street light. Nearly all weather patterns and outdoor settings are resistant to it. Rain or sun harm won't be a problem. It's easy to assemble our lamp. Place the light on it, then secure the screws after attaching the slip fitter to the round pole.
Due to the fact that they run on their own year-round, rain or shine, our solar lights will help you save a tonne of money on your electricity account. There's no need to stress about rate increases or bulb repairs. Additionally, the conversion of solar energy into power by the solar panels is more environmentally friendly. The large capacity battery also has the ability to store up to 100% of the energy produced, enabling the lights to easily run through the night and beyond.
In addition to the on/off button, the remote device has five other buttons that operate the solar spot lights. Our outdoor solar spot lights are set to remain on for the specified amount of time—2H/4H/6H—and then turn off. When the always button is pressed, the solar panel lights will remain on all night long until light is sensed, at which point they will turn off automatically. Until motion is detected, induction will maintain the solar lights at 30% power. When the object is gone, the lights will flash at maximum intensity before dimming back to 30%.
Usage:
FAQ:
1. What height is appropriate for photovoltaic street lights?
This device should be installed at a height of between 6 and 13 feet.
2. How long will a lamp remain fully illuminated?
When motion is noticed, the Solar LED Street Light will switch to high mode for 45 seconds before switching back to low mode.
3. Can this light be wall installed or does it need to be mounted to a pole?
Both methods can be used to mount this fixture. Either mounting the fixture straight to a wall or placing it on a pole both work.
4. How long is the charge good for?
The typical battery lifetime is 5 years before any life loss occurs; by year 10, replacement is required. Results may marginally vary depending on where you are.
